BOMgoods

Detailing Lab

How to clean and decontaminate with IronOFF

Prep before coating: cleaning and decontaminating wheels, painted surfaces and glass with IronOFF, as the label describes it.

Surface
Wheels, painted surfaces, glass
Time
Dwell a few minutes
Amount
Spray directly on the affected area

Get IronOFF · from $20.00Not sure this is the right product? →

You’ll need

  • IronOFF
  • Clean microfiber towels or a soft brush
  • Water for rinsing

Prep

  • Make sure wheels or panels are cool to the touch.
  • Work in the shade so the product doesn’t dry too fast.
  • Spot-test on a small, inconspicuous area first.

Steps

  1. Shake the bottle well.
  2. Spray onto the area you want to clean.
  3. Let it dwell for a few minutes.
  4. Agitate gently with a microfiber towel or soft brush.
  5. Rinse with water — especially on wheels.
  6. Inspect the area; repeat where needed.

Common mistakes

  • Spraying hot wheels or panels in the sun.
  • Skipping the spot test.
  • Using it on a coated car without planning to reapply the coating.

Safety & care

  • IronOFF is strong and may degrade previously applied coatings — reapply your coating afterwards.

Source: BOMgoods guide, first published 2023-08-22. Always follow the product label.

Next step: coat the clean surface